Box and Lock Design (Finished)


"Box and Lock Design (Finished)"

Constructed box/lock drawing board frame wall mount.
Digital Photo
April 2007

Here you can see the finished box/lock design in place. Also, not quite noticable, is the back plate as shown in the designs for the lock is no where to be seen. Infact, the drawing board itself has been used as this. A screw goes straight through the board into the lock plate.

The 'T' lock constructions were all fitted to the frame before the board was. It was only once everything was properly aligned the board was fixed to the frame.

DISCLAIMER: The opinions and attitudes of James W. Morris as expressed here in the past may or may not accurately reflect the opinions and attitudes of James W. Morris at present, moreover, they may never have.


this page last updated:29th April 2013 (C) 2003 - 2017 James W. Morris

script time:0.0240